Calcium Carbonate Versus Polymer Detergent Sludge
Two distinct substances coat the inside of a washing machine. The first is calcium carbonate, known as limescale. It precipitates out of hard tap water when heated above 50 degrees Celsius. The second is soap scum, formed when synthetic detergent builders bind with fatty oils from worn garments. Each residue requires a different chemical environment to break down.
Chemical Identification Test
Scrape a small amount of deposit from the rear drum lip with a fingernail or plastic scraper. Place the scraping on a saucer and apply three drops of ordinary malt vinegar. If the powder fizzes and produces visible bubbles, the deposit is calcium carbonate. If the deposit softens into a greasy smear without gas release, the deposit is insoluble soap scum.
- Limescale deposit: rough texture, brittle structure, dissolves in mild citric acid solution.
- Soap scum deposit: waxy feel, grey or brown colour, requires active oxygen and warm water to saponify.
- Mixed build-up: alternating crust layers common in hard water regions with heavy liquid detergent use.
Targeted Removal Routine
If your machine shows white limescale, the citric acid in Klarvessel dissolves the calcium shell. If your drum has grey soap scum, the sodium percarbonate oxidises the underlying fat layer. Run one tablet through a 60-degree wash cycle once every 30 days to treat both deposits before they coat the drum heater sheath.
Klarvessel