KlarvesselKlarvessel

Mechanical Service for Bellows and Traps

Clarifying tablets dissolve chemical scale and drum slime, but they cannot remove physical obstructions such as coins, lint pads, or hair clips. These physical items lodge in the lower rubber door boot and the pump lint filter. If left in place, they catch loose fibres, restrict pump drainage, and create standing water pockets that smell like stagnant pond water.

Physical Removal of Bellow Residue

Gently pull back the front fold of the rubber door bellow. Inspect the drainage holes at the six o clock position. Clear hairpins, coins, and lint balls with a dry cloth. Spray the rubber fold with a solution of warm water and a neutral surfactant. Wipe down the entire circumference of the seal to remove black mould spots. Leave the door open to air dry.

Clearing the Pump Cavity

Open the service hatch at the bottom right corner of the machine front panel. Place a shallow tray on the floor below the drain hose. Unplug the emergency drain hose plug to catch standing water. Unscrew the threaded filter plug counter-clockwise. Pull out the plastic basket. Rinse lint and gravel under a running tap. Reach into the empty pump housing with a finger to ensure the magnetic impeller spins freely without mechanical jamming.